Transponder

Transponder

P/N: AR6201/BXP6401-2

Manufacturer: Becker

Model  Number: AR6201/BXP6401-2

Price: RFQ

Description: Bundle

The AR6201 VHF-AM transceiver is smaller and lighter than its legendary AR 4201 due to implementation of state-of-art DSP (Digital Signal Processing) technology. It is mountable in the 2¼ inch standard instrument panel recess and is equipped with a highly efficient AM transmitter, a very sensitive receiver and a full graphic LC-display it is easily readable under all light conditions, including full sun. Push button and display illumination can be dimmed for use at night. Standard or dynamic microphones can be used. The dual watch mode allows to receive of two different channels, the active and a second frequency (for example ATIS). The AR6201, with its integrated VOX/Intercom circuit, facilitate communication between pilot and co-pilot. It is available in two variants: one with switch over for both 8.33 kHz and 25 kHz, or as 25 kHz only. Remote controlled units will coming soon.

The BXP6401/6402 is a LCD illuminated, compact and lightweight Mode-S transponder suited for VFR and IFR operations. The range of power supply voltage and the low power consumption make this transponder suitable for a wide range of aircraft. TSO Certified.

The transponder provides an interface to the central aircraft data system. It allows ELS, supports EHS, as well as ADS-B via extended squitter. The Mode-S ICAO address and additional fixed data are stored in a separate address module AM6400-1-(01), which is plugged on to the transponder and remains in the aircraft when the transponder is exchanged. BXP6401 is designed for panel mounting and fits into a 2 ¼ inch cut out. The BXP6402 version is designed for remote mounting. The sunlight readable display can be illuminated and dimmed for night operation. The BXP6401 transponder can be connected to blind encoders from most manufacturers via serial or parellel interface. For the simplest installation, the BE6400 blind encoder from Becker Avionics (sold seperately) connects directly to the transponder eliminating the need for an external power source.

BXP6401-1 is also directly exchangeable with the ATC4401-1 as the dimensions are the same and the main connector has the same pin assignment.

Share This Project
Leave A Reply